How to Choose the Right Metal Film Resistor?
Compare Noise, Stability, and Voltage Characteristics
Noise, drift, and voltage limits matter more than a resistor’s nominal value alone. IEC 60195:2016 specifies a method for measuring current noise in fixed resistors. Compare noise figures measured under the same conditions; otherwise, a lower number may not mean a quieter part in your circuit. In a high-gain audio input, excess noise can rise above the signal you want to preserve. Check the test conditions, too. Easy to overlook.
For stability, compare the temperature coefficient (TCR) and long-term drift in component specifications. Common precision options include TCR values around ±25, ±50, or ±100 ppm/°C, though availability varies by resistance and package. A ±50 ppm/°C part could shift about 0.5% across a 100°C change, before other aging effects. IEC 60115-1:2020 provides a general framework for fixed-resistor specifications and testing. A tighter TCR helps, but it does not guarantee low drift over years.
Voltage needs its own check. A 10 kΩ resistor dissipates 0.25 W at 50 V, using P = V²/R. Yet its rated power or maximum working voltage may impose a lower limit. Review both values in the specification, especially for compact packages. The detail is not always obvious. I would also leave margin for surges and temperature rise; choosing solely from a nominal voltage can be a poor shortcut.