| Galvanized Before Weaving | Steel wire is zinc-coated before it is woven into mesh. | Good | Usually has a bright metallic finish. Cut ends and areas worked during weaving may have less protective zinc than the wire surface. | Residential boundaries, sports grounds, and general-purpose fencing in mild to moderate environments. | Often an economical choice. Compare the specified zinc coating mass and wire diameter, not appearance alone. |
| Galvanized After Weaving | Steel mesh is woven first and then hot-dip galvanized, coating the assembled mesh. | Good to very good | Typically has a heavier, more uniform zinc finish over the mesh, including many intersections and cut areas. | Perimeter fencing, industrial sites, and outdoor installations where additional zinc protection is desirable. | Confirm the applicable coating specification and coating mass. Performance still depends on installation, drainage, and exposure. |
| PVC-Coated Galvanized Steel | Galvanized steel wire with an additional bonded PVC outer layer. | Very good when intact | Available in common colors such as green and black. The polymer layer can reduce direct exposure to moisture; damaged coating should be repaired where practical. | Gardens, parks, schools, residential properties, and projects requiring a colored finish. | Check the underlying zinc protection, PVC thickness, adhesion, and resistance to the site’s UV and temperature conditions. |
| Aluminum Alloy | Aluminum-alloy wire, generally without a separate paint or polymer coating. | Very good in many atmospheres | Lightweight metallic appearance; does not develop red rust like carbon steel. Surface appearance can change with weathering. | Coastal or humid locations and projects where lower fence weight is useful. | Confirm alloy and wire dimensions. Aluminum is softer than steel, so strength and impact requirements should be checked for the application. |
| Stainless Steel | Stainless steel wire, commonly specified by grade to suit the environment. | Very good to excellent, grade-dependent | Metallic finish with no applied coating required for corrosion protection. Cleaning may be needed in polluted or salt-exposed locations. | Marine, food-processing, chemical, and architectural applications where corrosion resistance is a priority. | Specify the stainless grade based on chloride exposure and service conditions; “stainless steel” alone does not define corrosion performance. |